Troubleshooting Error 3: Line-Fill Leaks

This case is typically caused by what we refer to as a “Line-Fill Leak”. These types of “leaks” are notoriously difficult to troubleshoot because they generally can’t be seen and are difficult to reproduce while on-site. The root cause for these types of leaks is...

Gen 3 Setup: Leak Detection and TOLerance

Leak Detection enables the Gen 3 to detect a leak in the nozzle circuit. To function properly, the leak TOLerance should be calibrated to reflect the number of nozzles on the nozzle circuit. To configure Leak Detection TOLerance for Nozzle Count DATA Menu, TOL.  Press...

Gen 1.3: Troubleshooting ERR3

What is ERR3: ERR3 is displayed when the actual MIST volume is significantly greater than the target volume. Most Common Cause:  leak in the nozzle circuit. Other Potential Causes: There are more nozzles installed in the nozzle circuit than entered as the NOZ count in...