by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 – Setup
To download and print the manual, click Gen 1.3: Operating Manual. -1. Pick a Suitable Location On firm level surface with good access for service. Free from flooding or sprinklers. Near GFCI outlet. Unit’s power cord is 12 ft. NEVER USE AN EXTENSION CORD!...
by homerjon_mistaway | Dec 31, 1969 | Controller & Remote, Gen 1.3 – Setup, Gen 3 – Setup
The “iMist2-ready” handheld transmitter with the light colored label will communicate with the white “iMist2-ready” receiver but not with the first generation (black) receiver. 1. Put the iMist2-ready receiver on the misting unit into...
by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 - Routine Service, Gen 1.3 – Setup, Insecticide
Click on links for labels, MSDS and misting-specific language. Conventional Formulations in Gen 1.3 systems – with Label Recommended Rates Sector – Synthetic Permethrin (10%), PBO (10%) RECOMMENDED Dilute 1oz concentrate with 109 oz water to yield 0.09%...
by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 – Setup, Gen 3 – Setup, Nozzle Circuit
WARNING! AIR TRAPPED IN THE FILTER DUE TO IMPROPER INSTALLATION AND SYSTEM STARTUP COULD CAUSE VIOLENT RUPTURE OF THE FILTER HOUSING RESULTING IN SEVERE PERSONAL INJURY! FOLLOW INSTRUCTIONS CAREFULLY. Do not remove Pressure Relief Valve Assembly Before...
by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 – Setup
iMist2 is our second generation wireless technology that allows our dealers to monitor and manage misting units over the internet. For an introduction to iMistAway, see iMist – Intro Video (8:41) For installation instructions, see iMist2: Setup Part 1-...
