Tech Self Help Articles » iMistAway » iMist2 Core Firmware Update

iMist2 Core Firmware Update

The iMist gateway connects to the internet router.

iMist2 Gateway Next to Internet Router

 
Unplug the iMist gateway power adaptor from the wall outlet or power strip. Wait 5 seconds, then plug the iMist gateway back in to power to trigger the update.
 
Once power to the iMist gateway is restored, all three lights will flash, and then only the red light will remain. After 2-3 minutes, the blue LED should light. 2-3 minutes later, the green LED will also light. This means that the firmware update has completed.
 

If only the red light remains, the iMist gateway is not connected to the internet. Please click here for troubleshooting, or contact your local MistAway Dealer for help.