Tech Self Help Articles » Gen 3 – Setup »Gen 3 Setup: Leak Detection and TOLerance

Gen 3 Setup: Leak Detection and TOLerance

Leak Detection enables the Gen 3 to detect a leak in the nozzle circuit.

To function properly, the leak TOLerance should be calibrated to reflect the number of nozzles on the nozzle circuit.

To configure Leak Detection TOLerance for Nozzle Count

  • DATA Menu, TOL.  Press and hold Green ► button for 5 seconds
  • Use ▲ or ▼ buttons to adjust value based on nozzle count:
Nozzle Count Tolerance (TOL)
less than 30 75%
30 to 50 50%
greater than 50 25%