Tech Self Help Articles » Gen 3 - Troubleshooting »Gen 3: Controller displays “MIST” but Nozzles Not Misting

Gen 3: Controller displays “MIST” but Nozzles Not Misting

Possible Causes:

Failure to Pump:

  • Clogged intake filter – common, but not usually the culprit
  • Insecure pump intake – not common on Gen 3
  • Pump failure – common, but not usually out of the box
  • Controller relay failure – very uncommon
  • Motor failure – very uncommon

Pumping but not generating pressure in nozzle circuit

  • Pump bypass too open – not common
  • Auto Drain Valve is off (or failed?) – pretty common
  • Agitation Valve not opening (or completely opening?) during mist cycle – not common
  • Leak in nozzle circuit – common
  • Too many nozzles for pump – not common

Pumping and generating pressure, but no mist

  • Blockage/kink in nozzle circuit – not common
  • Clogged nozzles – common

See Gen 3:  Troubleshooting Nozzles Not Misting